Plasma cutting inverter with ^PLUS technology.

Plasma cutting equipment for CNC controlled cutting of mild steel with machine torch PerCut80 / PerCut90 with oxygen or air as plasma gas.

• with HiFocus ^PLUS technology from 0.5 to 20 (25) mm (material depending)
• Recommended range for production from 0,5 to 20 mm (technology depending)
• Max. piercing thickness 15 mm (material depending)

HiFocus technology:

• Cost saving alternative to laser cutting with less than a fourth of installation and running costs
• Fast cutting start because of very short transition time
• Low squareness and inclination tolerances of the cutting surface; nearly no rework required
• Precise profiles when cutting sharp edges or narrow radii
• Cutting of small holes
• HiFocus technology grants high part accuracy
• No or easy to remove slag adherence

Power source HiFocus 80i:

• Flexible adaptation to two or three dimensional guiding systems, as there are robots, profile cutting machines or tube cutting machines
• Flexible adaptation of the process sequence to the cutting conditions by soft switch inverter with microprocessor control
• Longevity of torch consumables because of second gas ignition and nozzle saving piercing with swirl-gas technology
• Optimum process control due to very fast cutting-current adaptation
• Process monitoring for torch cooling, ignition time, pilot arc time
• Process monitoring for torch cooling, ignition time, pilot arc time, power source, gas system
• Analogue (and serial interface for robot application) for adaptation to CNC
• Serial data transfer to PC for diagnostic purposes
• Step-less cutting-current adjustment from 10 to 80 A
• Optimum piercing capabilities by step-less time delay by adjustable current raise
• Adjustable current reduction at corner, start and stop signals from the guiding system
• Automatic display of the pre-selected cutting current

Plasma torch PerCut 80/90:

• Use of a quick change head PerCut 90 with bayonet catch) for time saving changes of worn consumables or for quick adaptation to other cathode-nozzle system
• Plasma machine torch PerCut 80/90 with newly developed nozzle-cathode concept and swirl-gas technology ensure absolute stable main arc properties
• Longevity of consumables due to water cooling swirl gas and dual-gas ignition
• Hose parcel extension of 15m enlarge the operational radius in connection with a plasma torch connecting unit
• Special torches for particularly applications available on request (robot types; with short and/or bended shafts)

Technical data:

Mains voltage	(V)	3x 400 (50 Hz)
Fuse "C"	(A)	25
Connecting power	(kVA)	17
Protection class	-	IP 22
Open circuit voltage	(V)	400
Cutting current	(A)	10 - 80 (stepless) / 100% d.c.
Piercing with height sensing system	(mm)	15
Cutting thickness - maximum - recommended	(mm)	25 (material depending) 20 (material depending)
Plasma gases	-	Oxygen, Air
Swirl gases	-	Oxygen, Nitrogen, Air
Cooling	-	Fluid (Kjellfrost)
Ignition	-	High voltage
Weight	(kg)	161
Dimensions L x W x H	(mm)	910 x 510 x 970