Entry-level oxygen plasma cutting system, great for often-changing cutting requirements and production schedules. A proven production cutting system with an attractive initial capital cost.

The MAX200 can also be used for hand-held applications.

MAX200 Specifications
Capacity	Dross free	25mm (1")
Mild steel	Production (pierce)	25mm (1")
	Severance (edge starts)	50mm (2")
Stainless steel	Production (pierce)	25mm (1")
	Severance (edge starts)	50mm (2")
Aluminium	Production (pierce)	25mm (1")
	Severance (edge starts)	50mm (2")
Speed*	Optimum quality	12mm (1/2")
(Mild steel)		2159 mm/m
		(85 ipm)
Cut angle	ISO 9013 range **	4 - 5
Weldability		Ready to weld
Process gases by material	Mild steel	Air/Air, O2/Air, N2/CO2
(plasma shield)
	Stainless steel	Air/Air, O2/Air, N2/CO2
	Aluminium	Air/Air, O2/Air, N2/CO2, H35/N2
Process amps	Not all processes available for all materials	40 - 200 bevelling (200)
* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.
** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.