Hypertherm Plasma Systems.
HyPerformance Plasma: HPR130 & HPR260. 
HyPerformance plasma mechanized systems deliver incomparable HyDefinition cut quality at half the operating costs. By incorporating Hypertherm’s proven HyDefinition and LongLife technologies, HyPerformance plasma boosts overall performance, productivity and profitability. The systems offer unmatched process flexibility to cut, bevel and mark metals up to 64 mm (2-1 /2") thick.
HPR Systems.
HyPerformance Systems Specifications
    HPR130 HPR260
Capacity Dross free 16mm (5/8") 32mm (1-1/4")
       
Mild steel Production 25mm (1") 32mm (1-1/4")
  (pierce)    
  Severance 38mm (1-1/2") 64mm (2-1/2")
  (edge starts)    
       
Stainless steel Production 20mm (3/4") 32mm (1-1/4")
  (pierce)    
  Severance 25mm (1") 50mm (2")
  (edge starts)    
       
Aluminium Production
(pierce)
20mm (3/4") 25mm (1")
       
  Severance
(edge starts)
25mm (1") 50mm (2")
       
Speed* Optimum
quality
12mm (1/2") 12mm (1/2")
       
(Mild steel)   2200 mm/m 3850 mm/m
    (80 ipm) (145 ipm)
       
Cut angle ISO 9013 range ** 2 - 4 2 - 4
       
Weldability   Ready to weld Ready to weld
       
Process gases by material Mild steel O2/Air, O2/O2 O2/Air, O2/O2
(plasma shield)      
  Stainless steel H35/N2, N2/N2, H35-N2/N2, F5/N2 H35/N2, N2/N2, H35-N2/N2, F5/N2
       
Aluminium H35/N2, Air/Air, H35-N2/N2 H35/N2, Air/Air, H35-N2/N2
       
Process amps Not all processes
available for all
materials
30 - 130 30 - 260
       
* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.
       
** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.