MACHINE CUTTING TORCHES
for high quality flame cutting.
for high quality flame cutting.
- High operation reliability, safe against flashbacks even under extreme load.
- Low maintenance requirement due to perfectly matched combinations of torches and nozzles.
- Sturdy design and carefully selected materials guarentee long service life.
- Suitable for all fuel gases.
- Available in various versions and overall lengths.
We are ready to take your call
Tel: 00 44 (0)191 250 4610
Fax: 00 44 (0)191 250 1471
Tel: 00 44 (0)191 250 4610
Fax: 00 44 (0)191 250 1471
Machine Cutting OxyFuel Torches
Innovation In OxyFuel Cutting
 |
||||
| Round head two-hose machine cutting torch | QUICKY | |||
| Type QUICKY-A for acetylene |
 |
|||
| Type QUICKY-PMYF for propane/methane/Mapp/ethylene | ||||
| Type | Nozzle Type | Art.No. Type-A |
Art.No. Type-PMYF |
|
| QUICKY-A / PMYF | Ring/slot nozzles | 540.93330 | 545.93330 | |
| QUICKY-A / PMYF | Gas-mixing nozzles | 716.11040 | 716.11040 | |
| With adjusting valves, flashback arrestors and connecting hoses | ||||
| Cutting range: up to 100mm | ||||
| For hand cutting machine QUICKY |
||||
| Nozzle Type-Acetylene: ARS, VADURA 1215-A, VADURA 1215-A PLUS, VADURA 1210-A, VADURA 1210-A PLUS, A-CID |
||||
| Nozzle Type-Propane: PL-RC, GRICUT 1230-PMYF, GRICUT 1230-PMYF PLUS, GRICUT 1270-PY, GRICUT 1270-PY PLUS, GRICUT 8281-PMYF |
||||
|
||||
| Three-hose machine cutting torch for ring/slot nozzles | ALFA 4450 / 250 | |||
| Type ALFA 4450-A for acetylene |
 |
|||
| Type ALFA 4450-P for propane/methane/Mapp/ethylene | ||||
| Type | Shaft length | Art.No. Type-A |
Art.No. Type-P |
|
| ALFA 4450 / 250 | 250 mm | 716.11310 | 716.11300 | |
| Contact cap | 716.11301 | 716.11301 | ||
| GRIVA Outer Nozzle | 2 - 300 mm | 716.16300 | 716.16300 | |
| Cutting range: up to 300mm | ||||
| For flame cutting machines of series SICOMAT, OMNIMAT, MULTITHERM, MULTITHERM-ECO |
||||
| Nozzle Type-Acetylene: VADURA 1211-A, VADURA 1216-A |
||||
| Nozzle Type-Propane: GRICUT 1231-PMYF, GRICUT 1271-PYF |
||||
Need more information? |
||||
|
||||
| Three-hose machine cutting torch for ring/slot nozzles | MS 832 | |||
| Type MS 832-A for acetylene |
 |
|||
| Type MS 832-PMYF for propane/methane/Mapp/ethylene | ||||
| Type | Shaft length | Art.No. Type-A |
Art.No. Type-PMYF |
|
| MS 832 / 110 | 110 mm | 716.11147 | 716.11148 | |
| MS 832 / 160 | 160 mm | 716.11149 | 716.11150 | |
| MS 832 / 250 | 250 mm | 716.11127 | 716.11142 | |
| Shaft diameter: 32mm | ||||
| Cutting range: up to 300mm | ||||
| For flame cutting machines of series MINISEC, SECATOR, CORTA, STATOSEC, MULTISEC, SICOMAT, CORTINA, SCANCUT, EASYTHERM, OMNIMAT, COMCUT, MULTITHERM, MULTITHERM-ECO |
||||
| Nozzle Type-Acetylene: ARS, VADURA 1215-A, VADURA 1215-A PLUS, VADURA 1210-A, VADURA 1210-A PLUS |
||||
| Nozzle Type-Propane: PL-RC, GRICUT 1230-PMYF, GRICUT 1230-PMYF PLUS, GRICUT 1270-PY, GRICUT 1270-PY PLUS, GRICUT 1280-PMYF, GRICUT 1280-PMYF PLUS |
||||
|
Need more information? |
||||
|
||||
| Three-hose machine cutting torch with toothed rack, for ring/slot nozzles | MSZ 832 | |||
| Type MSZ 832-A for acetylene |
 |
|||
| Type MSZ 832-PMYF for propane/methane/Mapp/ethylene | ||||
| Type | Shaft length | Art.No. Type-A |
Art.No. Type-PMYF |
|
| MSZ 832 / 320 | 320 mm | 716.11170 | 716.11171 | |
| Shaft diameter: 32mm | ||||
| Cutting range: up to 300mm | ||||
| For flame cutting machines of series CORTA SM, MULTITHERM, MULTITHERM-ECO |
||||
| Nozzle Type-Acetylene: ARS, VADURA 1215-A, VADURA 1215-A PLUS, VADURA 1210-A, VADURA 1210-A PLUS |
||||
| Nozzle Type-Propane: PL-RC, GRICUT 1230-PMYF, GRICUT 1230-PMYF PLUS, GRICUT 1270-PY, GRICUT 1270-PY PLUS, GRICUT 1280-PMYF, GRICUT 1280-PMYF PLUS |
||||
|
Need more information? |
||||
|
||||
| Accessories for machine cutting torch series MS 832 / MSZ 832 | Strip Cutting Torch | |||
| for acetylene or propane/methane/Mapp/ethylene |
 |
|||
| Description | Working radius | Cutting range | Art.No. | |
| Strip cutting torch | 30 - 400 mm | 3 - 60 mm | 716.51155 | |
| Additional device for increasing the cutting efficiency and reduction of warping on cutting of sheet strips | ||||
| SPECIAL OFFER !!! | ||||
|
||||
| Accessories for machine cutting torch series MS 832 / MSZ 832 | Swivelling Torch Head | |||
| for acetylene or propane/methane/Mapp/ethylene |
 |
|||
| Description | Swivel range | Cutting range | Art.No. | |
| Swivelling torch head | +/- 90 degree | 3 - 300 mm | 716.51295 | |
| Additional device for carrying out bevel cuts in length and cross directions. | ||||
|
||||
| Four-hose machine cutting torch with internal ignition, for ring/slot nozzles |
MS 3450 / 250 | |||
| Type MS 3450/250-A for acetylene |
 |
|||
| Type MS 3450/250-PMYF for propane/methane/Mapp/ethylene | ||||
| Type | Shaft length | Art.No. Type-A |
Art.No. Type-PMYF |
|
| MS 3450 / 250 | 250 mm | 716.51310 | 716.51320 | |
| Shaft diameter: 45mm | ||||
| Cutting range: up to 300mm | ||||
| For flame cutting machines of series CORTA, STATOSEC, OMNIMAT, MULTITHERM, MULTITHERM-ECO |
||||
| Nozzle Type-Acetylene: ARS, VADURA 1215-A, VADURA 1215-A PLUS, VADURA 1210-A, VADURA 1210-A PLUS |
||||
| Nozzle Type-Propane: PL-RC, GRICUT 1230-PMYF, GRICUT 1230-PMYF PLUS, GRICUT 1270-PY, GRICUT 1270-PY PLUS, GRICUT 1280-PMYF, GRICUT 1280-PMYF PLUS |
||||
| Torch cannot be fitted to swivel-type and rotating triple-type torch assemblies ! | ||||
|
||||
| Four-hose machine cutting torch with internal ignition, for ring/slot nozzles |
MS 3452 / 250 | |||
| Type MS 3452/250-A for acetylene |
 |
|||
| Type MS 3452/250-PMYF for propane/methane/Mapp/ethylene | ||||
| Type | Shaft length | Art.No. Type-A |
Art.No. Type-PMYF |
|
| MS 3452 / 250 | 250 mm | 716.11010 | 716.11011 | |
| Shaft diameter: 45mm | ||||
| Cutting range: up to 300mm | ||||
| For flame cutting machines of series CORTA, STATOSEC, CORTINA, EASYTHERM, OMNIMAT, COMCUT, MULTITHERM, MULTITHERM-ECO |
||||
| Nozzle Type-Acetylene: ARS, VADURA 1215-A, VADURA 1215-A PLUS, VADURA 1210-A, VADURA 1210-A PLUS |
||||
| Nozzle Type-Propane: PL-RC, GRICUT 1230-PMYF, GRICUT 1230-PMYF PLUS, GRICUT 1270-PY, GRICUT 1270-PY PLUS, GRICUT 1280-PMYF, GRICUT 1280-PMYF PLUS |
||||
| Torch cannot be fitted to swivel-type and rotating triple-type torch assemblies ! | ||||
|
||||
| Dosing unit for machine cutting torch MS 3452-A / PMYF | Dosing Unit | |||
| for acetylene or propane/methane/Mapp/ethylene |
 |
|||
| Description | Art.No. | |||
| for MS 3452 / 60 Hz | 716.11277 | |||
| for MS 3452 / 50 Hz | 716.11276 | |||
| Go to Page 2 | ||||
